top of page
banner.jpg

PICKLEBALL COURT RESURFACING, TENNESSEE

Resurfacing a Pickleball Court - Tennessee Pickleball Company

1. Preparation

  • Clean the Surface: We thoroughly clean the court surface using a pressure washer or hose. We remove all dirt, debris, oil, and loose material and then allow the surface to dry completely.

  • Repair Cracks and Imperfections: We fill any cracks or holes with an appropriate patching compound or crack filler. We smooth out the patches and allow them to cure according to the manufacturer’s instructions.

2. Surface Cleaning

  • We sweep or blow off any remaining debris from the court surface and also ensure the surface is dry and clean before applying any paint.

3. Mixing the Paint

  • Prepare the Paint: We stir the SealMaster acrylic sports paint thoroughly using a mixing drill and paddle. If necessary, mix in a non-slip texture additive as per the manufacturer’s guidelines.

  • Dilution: If recommended, we dilute the paint with water. We also follow the manufacturer’s instructions for the correct dilution ratio.

4. Application

  • Masking: We use masking tape to protect any areas you do not want to paint, such as adjacent surfaces or lines.

  • Base Coat: We apply a base coat of the acrylic sports paint using a squeegee or roller. We start at one end of the court and work our way to the other end in a systematic manner. We also ensure an even and smooth application and allow the base coat to dry completely.

  • Second Coat: We then apply a second coat in the same manner as the first. This coat will enhance the color and durability of the surface and allow it to dry completely.

5. Line Marking

  • Measure and Mark: We use measuring tape and a chalk line to mark the lines for the pickleball court. Standard court dimensions are typically 20 feet wide and 44 feet long.

  • Apply Line Paint: We then use masking tape to outline the lines and apply the line paint using a roller or brush. We ensure the lines are straight and of consistent width and allow the line paint to dry completely before removing the tape.

6. Final Touches

  • We inspect the surface for any missed spots or uneven areas and touch up as needed.

  • We allow the court to cure for the recommended time before using it for play.

Maintaining a Pickleball Court - Tennessee Pickleball Contractors

Maintaining a new pickleball court is essential to ensure its longevity, safety, and playability. Proper care helps keep the surface in good condition and extends its lifespan. Here’s a guide to caring for and maintaining your pickleball court:

1

Surface Cleaning

  • Regular Sweeping: Use a soft-bristle broom or a blower to remove dirt, leaves, and debris from the court surface regularly. This helps prevent the buildup of abrasive materials that can wear down the court.

  • Washing the Court: Periodically wash the court with water to remove dirt and stains. Use a mild detergent if necessary. Avoid harsh chemicals that could damage the surface. For tough stains or mildew, a diluted solution of vinegar and water can be effective.

2

Court Inspection

  • Check for Cracks: Regularly inspect the court for any cracks or damage. Small cracks can develop over time, especially if the court is exposed to harsh weather conditions. Addressing these early prevents them from becoming larger issues.

  • Look for Surface Wear: Pay attention to areas where the surface might be wearing down, particularly in high-traffic zones like the baseline and service areas. Resurfacing may be required if wear becomes significant.

3

Preventive Maintenance

  • Seal Coating: Apply a seal coat every 3-5 years, depending on the usage and weather conditions, to protect the court surface from UV rays and water damage.

  • Line Repainting: Over time, the court lines may fade. Repaint the lines as needed to maintain clear boundaries and ensure accurate play.

  • Proper Drainage: Ensure that the court has adequate drainage to prevent water from pooling, which can lead to surface damage and slippery conditions. Clear any drains or gutters regularly.

4

Protecting the Surface

  • Avoid Hard Objects: Ensure players use appropriate footwear (non-marking court shoes) to prevent surface damage. Avoid dragging heavy equipment or furniture across the court.

  • Keep the Court Dry: After rain, remove standing water as soon as possible using a squeegee or a roller. Allow the court to dry fully before play resumes to avoid slipping hazards and surface damage.

  • Shade and Cover: If possible, provide shade or cover for the court to protect it from direct sunlight and reduce UV damage. This also helps in maintaining the surface color and texture.

5

Seasonal Maintenance

  • Winterizing: In colder climates, prepare the court for winter by removing any net posts and covering the court to protect it from snow and ice. Ensure that the surface is clean and free of debris before covering.

  • Post-Winter Inspection: After winter, inspect the court for any damage caused by freezing and thawing cycles. Address any cracks or surface issues promptly.

6

Nets and Posts

  • Net Tension: Regularly check the tension of the net. Over-tightening can cause damage to the posts and the court surface. When not in use for extended periods, consider loosening the net to reduce stress.

  • Post Maintenance: Inspect the net posts for rust or wear. Apply a protective coating to prevent rust and ensure that the posts remain securely anchored.

7

Player Education

  • Court Etiquette: Educate players about proper court etiquette, such as wearing the right shoes, avoiding dragging feet or paddles, and refraining from eating or drinking on the court, except water.

8

Professional Maintenance

  • Resurfacing: Depending on the court's usage, plan for professional resurfacing every 4-8 years. This will refresh the surface and ensure consistent playability.

  • Professional Inspections: Consider having a professional inspect the court periodically, especially if it's seeing heavy use. They can provide expert advice on maintenance and potential repairs.

bottom of page